GoogleI am so happy with the service. Next day appointment, excellent communication and the technician was great!
24/7/365 Emergency
Commercial Dishwasher Not Cleaning?
Why are my commercial dishwasher dishes still dirty after a cycle? Common causes, what you can check, and when to call our licensed and insured technicians.
Licensed 2136098-DCWP
3-Month Warranty
Insured
24/7/365 emergency response
Office hours Mon–Sun 8am–9pm (EDT)
Equipment We Service
Ovens & Cooking
Refrigerators & Freezers
Ice Makers
Dishwashers
Washers & Dryers
2022
Serving Since
24/7/365
Emergency
Service-call pricing
FREE with repair — every tier goes toward your repair, $0 extra.
Standard Most appliances + brands | $99 |
Luxury High-end (Sub-Zero, Wolf, Miele, BlueStar, Thermador, etc.) | $119 |
Commercial Walk-in coolers, commercial laundry, restaurant equipment | $149 |
Warranty: 3-month parts, 3-month labor. Technician quotes the repair on-site before any work.
Request Service
Appliance Down? Instant SMS & Email Confirmation.
Submit below — you get an instant SMS + email confirming we've received your request. Our dispatcher locks in your tech's exact arrival time within 1 business hour. Live tracking link in every message.
Your commercial dishwasher is leaving dishes less than sparkling, and you're wondering what's going on. Whether you're running a busy restaurant in Concord or a cafe in Grasmere, a clean kitchen is essential, and a malfunctioning dishwasher can really disrupt your day. This page will help you understand the common reasons why your commercial unit might not be cleaning effectively. We'll explore some simple checks you can perform yourself, and importantly, guide you on when it’s time to call in the experts at CityFix for a professional diagnosis and repair.
Common causes of commercial dishwasher not cleaning
Low Water Temperature
criticalPro recommendedThe dishwasher needs water hot enough to dissolve grease and sanitize. If the water heater is malfunctioning or the supply line is too long, the temperature may be insufficient.
Clogged Wash Arms or Nozzles
importantCan DIY checkFood debris and mineral buildup can block the small holes in the wash arms, preventing proper water spray. This leads to uneven cleaning and spots on dishes.
Improper Detergent Use
importantCan DIY checkUsing the wrong type or amount of detergent, or using an old, ineffective detergent, can lead to poor cleaning. Some detergents require specific water conditions to work correctly.
Faulty Water Inlet Valve
importantPro recommendedIf the valve doesn't open fully or is clogged, the dishwasher may not fill with enough water, impacting the spray pressure and cleaning effectiveness.
Worn Pump or Motor
criticalPro recommendedThe pump circulates water through the wash arms. If it's weak or failing, the water pressure will be too low to effectively remove food particles.
Clogged Drain Filter or Hose
importantCan DIY checkA blocked filter or drain hose prevents dirty water from being removed effectively, leaving residue on dishes and potentially interfering with the next wash cycle.
Quick checks you can run safely
- 1
Check Water Supply
Ensure both hot and cold water valves connected to the dishwasher are fully open. Check if other hot water fixtures in the building are producing hot water.
- 2
Inspect Wash Arm Nozzles
Carefully remove the wash arms (if possible according to the manual) and check the small holes for blockages. Use a toothpick or small wire to clear any debris.
Safety: Ensure the dishwasher is unplugged before attempting to remove parts. Be careful of sharp edges on the wash arms. - 3
Examine Filter and Drain Area
Locate and remove the filter at the bottom of the dishwasher tub. Clean it thoroughly under running water and check the drain hose connection for visible obstructions.
Safety: Ensure the dishwasher is unplugged before accessing the filter and drain area. - 4
Verify Detergent Dispensing
Check that the detergent dispenser is opening correctly during the cycle and that you are using a high-quality detergent specifically designed for commercial dishwashers.
- 5
Confirm Water Temperature
If possible, measure the water temperature entering the dishwasher during a cycle. It should typically be between 140-160°F (60-71°C) for effective cleaning.
Safety: Be cautious of hot water to avoid burns.
When to call a pro right away
No water or very little water entering the dishwasher
This could indicate a problem with the main water supply, the inlet valve, or internal plumbing that requires professional diagnosis and repair to prevent water damage.
The dishwasher is making unusual noises (grinding, loud humming)
These sounds often point to a failing pump motor or internal component that could lead to a complete breakdown if not addressed by a qualified technician.
Water is not draining from the tub after a cycle
A persistent clog or a malfunctioning drain pump can cause water to back up, leading to unsanitary conditions and potential damage to the appliance. DIY attempts to clear severe clogs can be messy and ineffective.
Suspected electrical issues or error codes displayed
Working with electrical components or interpreting complex error codes without proper training is dangerous and can cause further damage or void warranties. Leave electrical diagnostics to trained professionals.
Saw a red flag above? Don't wait.
Same-day service. transparent service-call pricing (applied to repair) — applied to your repair.
Typical repair time once diagnosed: 90 minutes
Error code on your display?
Look up your brand's error codes for commercial dishwasher not cleaning — we cover the most common codes for each brand we service.
This page provides general diagnostic guidance for commercial dishwasher not cleaning. Specific causes and repairs vary by appliance brand, model, and condition. For accurate diagnosis, contact a licensed appliance repair technician. Repairs involving refrigerant systems, gas lines, or high-voltage circuits require certified professionals — DIY attempts on these systems may be illegal and dangerous.
How our repair process works
Five steps from your first call to the warranty receipt. No surprises.
- 1
Inspection
Your technician examines the appliance, listens to your description, and notes the model + serial for parts lookup. Visual + audio-based diagnostics first — non-invasive.
- 2
Diagnostics
Targeted tests on the failing subsystem (compressor, control board, heating element, motor, etc.) to identify the exact root cause. You get a clear explanation, not jargon.
- 3
Fix decision
Up-front estimate before any work begins: cost, parts, and the realistic likelihood of success vs. recommending replacement on an old or uneconomical unit. You decide.
- 4
Operational test
After the repair we run the appliance through its normal cycle on-site — never "it should work now, call us if it doesn't." You sign off when it's actually working.
- 5
Warranty + consultation
Receipt with warranty terms in writing. Plus a quick walkthrough of how to extend the appliance's life (filter cleaning, drain maintenance, etc.) — included free.
What our customers say
Excellent5.0Verified Google Reviews
Google
GoogleProfessional, knowledgeable totally would use them again.
GoogleThey came out the first time fixed the wine cooler . Then something else went wrong but they came out a fixed the situation right away. They are reliable and professional .
GoogleGreat Service! Max came out and fixed the issue with my dryer same day. If your looking for appliance repair look no further !
GoogleMy husband called them to help fix our washer / dryer but we ended up using them to fix the gasket on our refrigerator. Very friendly, knowledgeable and prompt service. Very clean as well ! Would highly recommend for all your appliance fixing needs !
GoogleIt took only 10 min to setup an appointment. The next day their technician showed up on time and was very courteous and was able to troubleshoot the issue within a few minutes. Definitely will recommend and use again for any appliance repair. Thank you.
Hours of Operation(all times EDT)
Mon8am–9pm EDT
Tue8am–9pm EDT
Wed8am–9pm EDT
Thu8am–9pm EDT
Fri8am–9pm EDT
Sat8am–9pm EDT
Sun8am–9pm EDT
24/7/365 Emergency Service — live dispatcher answers around the clock. Emergency response within 4 hours in most service areas. When your appliance is down, we move fast.
Same-Business-Day Response Available — call before noon for priority scheduling in your service area.
Weekend Service Available— we work Saturday and Sunday for operators who can't wait until Monday.
Emergency dispatch available 24/7/365 (EDT).
Appliance Down? Instant SMS & Email Confirmation.
CityFix Appliance Repair — licensed & insured, same-day available. Tech arrival time confirmed within 1 business hour.